Kitchen Renovation Services in Toronto & the GTA
Planning a kitchen renovation Toronto or GTA-wide? GMC Construction Inc. handles the entire project under one roof — custom cabinetry, quartz and granite countertops, flooring, lighting, plumbing, electrical, and appliance installation. One team, one point of contact, and one fixed-price quote, backed by a written workmanship warranty and 500+ completed projects across the GTA.
Your kitchen is where your home actually lives, and renovating it well takes more than good taste. It takes trades that show up in the right order, a layout that works for how you cook, and a crew that can open a wall without guesswork. With 10+ years of experience across Toronto and the GTA, we plan every kitchen around how you’ll actually use it — then build it to last.
Our Kitchen Renovation Services
Custom Cabinetry
Designed and built to fit your space and storage needs, not forced into stock sizes. Soft-close hardware, proper interior organization, and finishes chosen to match your kitchen.
Countertops
Quartz, granite, and other stone surfaces — templated on site and installed to last. We help you weigh durability, maintenance, and budget before you commit.
Layout Changes & Wall Removal
Opening up a closed kitchen or reworking the flow — planned properly and built to code, backed by our structural engineering foundation.
Plumbing & Electrical
Relocating the sink, adding outlets and under-cabinet lighting, and wiring for modern appliances — all done to code by licensed trades.
Appliance Installation
Fitted and connected as part of the finished kitchen — including panel-ready and integrated units — so you’re not left coordinating it afterward.
Flooring, Tile & Backsplash
The finishing work that ties the kitchen together — porcelain, hardwood, or luxury vinyl underfoot, and a backsplash that becomes a focal point.
How Much Does a Kitchen Renovation Cost in Toronto?
Kitchen costs in the GTA vary widely with scope — the same footprint can be a modest refresh or a full custom rebuild. Most projects fall into one of these tiers:
Cabinet Refacing / Refresh
$10,000 – $20,000
Same-Layout Renovation
$25,000 – $40,000
MOST COMMON
Full Mid-Range Kitchen
$40,000 – $75,000
Custom / Layout Change
$75,000 – $110,000
Luxury Custom Kitchen
$110,000 – $150,000+
These reflect complete, turnkey kitchen renovations in the GTA for 2026 — including demolition, cabinetry, countertops, flooring, plumbing, electrical, and finishing. Condo kitchens typically run 10–20% higher due to board approvals and building access requirements.
Key factors that affect kitchen renovation costs:
- Cabinetry tier — usually the single largest line item. The gap between stock and fully custom can be $15,000–$25,000 on the same footprint.
- Countertop material — premium quartz versus natural marble can swing the countertop line by thousands.
- Layout changes — moving the sink, stove, or a wall adds plumbing, electrical, and permit costs.
- Appliance package — a standard package and a professional-grade one are very different budgets.
- Home age & condition — older Toronto homes often reveal wiring or plumbing that needs bringing up to code.
The single biggest lever is whether the layout stays put. Keeping the sink, stove, and dishwasher in their existing positions saves thousands. We provide a detailed, fixed-price quote after a free in-home consultation, so there are no surprises — and for a full breakdown of what drives kitchen pricing, see our kitchen renovation cost guide.
Why Choose GMC for Your Kitchen Renovation?
Structural engineering expertise
Opening up a kitchen often means touching load-bearing walls. GMC is led by an owner who holds a Master’s degree in Structural Engineering, so layout changes are planned properly and built to code — not crossed-fingers.
Cabinetry done right
Cabinets are the biggest line in most kitchen budgets and the most visible when they’re wrong. We plan storage around how you actually cook, and install to tolerances that keep doors and drawers aligned for years.
Every trade under one roof
Cabinetry, countertops, plumbing, electrical, flooring, and appliances handled by one accountable team — sequenced so trades aren’t waiting on each other and your kitchen isn’t out of service longer than it needs to be.
Fixed-price quotes
You get a clear, itemized, fixed-price quote before we start — so the number you agree to is the number you pay. No mid-project surprises, no “TBD” line items.
Written workmanship warranty
Our work is backed in writing. Combined with written contracts and clear timelines, that gives you confidence from the first consultation to the final walkthrough.
A track record you can check
500+ completed projects and a 5.0-star rating from 85+ Google reviews across the GTA, with 10+ years renovating Toronto-area homes — including older properties with their own surprises.
Cabinetry & Countertops: Where Kitchen Budgets Are Won or Lost
Two decisions drive most of a kitchen’s cost and most of its long-term satisfaction. Getting them right matters more than any single finish choice.
Stock, Semi-Custom or Custom
Stock keeps costs down but limits sizes. Semi-custom is the sweet spot for most GTA kitchens — close to the custom look at a fraction of the price. Full custom is worth it for awkward footprints and specific storage needs.
Quartz vs. Natural Stone
Quartz is non-porous, stain-resistant and virtually maintenance-free. Granite and marble bring natural character but need sealing. We template on site so seams land where they should.
Storage That Actually Works
Deep drawers instead of low cupboards, a proper pantry pull-out, corner solutions that don’t waste space, and a place for the things you use daily within arm’s reach of where you use them.
Lighting in Layers
Ambient light for the room, task lighting under cabinets where you actually chop and read recipes, and accent lighting to set the mood. Planned during rough-in, not bolted on afterwards.
Kitchen Renovation Projects We Take On
Most kitchen projects in the GTA fall into one of three shapes. Here’s what each typically involves:
Same-Layout Renovation
New cabinets, countertops, flooring and fixtures with the plumbing and electrical staying where they are. The fastest, most cost-effective way to completely change how a kitchen looks and works.
Custom Cabinetry & Countertops
Cabinetry built to your space and storage needs, paired with quartz or natural stone. For kitchens where stock sizes leave dead space or the storage simply doesn’t work.
Open-Concept Layout Change
Removing a wall to connect the kitchen with living space. This is where our structural engineering background matters most — load paths, beams, and permits handled properly.
Choosing the Right Materials for Your Kitchen
The materials you choose shape your kitchen’s durability, look, and budget. Here’s how the most common countertop, cabinet, and flooring options compare:
Comparison of Kitchen Materials
| Material | Cost | Rating | Lifespan | Pros | Cons |
|---|---|---|---|---|---|
| Quartz (Countertops) | $$$$ | ⭐⭐⭐⭐⭐ | 20+ yrs | Non-porous, stain-resistant, low maintenance, durable | Expensive, not heat-resistant |
| Granite (Countertops) | $$$ | ⭐⭐⭐⭐ | 15–20 yrs | Natural stone look, scratch-resistant, heat-resistant | Requires sealing, heavy, costly |
| Marble (Countertops) | $$$$ | ⭐⭐⭐⭐ | 10–15 yrs | Luxurious look, cool surface for baking | Stains easily, frequent sealing |
| Laminate (Countertops) | $ | ⭐⭐⭐ | 10+ yrs | Budget-friendly, wide design variety, low maintenance | Less durable, prone to scratches |
| Solid Wood (Cabinets) | $$$ | ⭐⭐⭐⭐ | 20+ yrs | Timeless, durable, customizable | Expensive, requires maintenance |
| MDF (Cabinets) | $$ | ⭐⭐⭐ | 10–15 yrs | Affordable, smooth finish, moisture-resistant versions | Not as durable as wood, can warp |
| Tile (Flooring) | $$ | ⭐⭐⭐⭐ | 20+ yrs | Water-resistant, easy to clean, variety | Cold/hard underfoot, grout upkeep |
| Hardwood (Flooring) | $$$ | ⭐⭐⭐⭐ | 15–25 yrs | Warm, elegant, long-lasting | Scratches, needs refinishing |
| Vinyl (Flooring) | $ | ⭐⭐⭐ | 10–15 yrs | Water-resistant, budget-friendly, easy install | Less durable, can dent/fade |
How Long Does a Kitchen Renovation Take?
A typical full kitchen renovation runs 6 to 8 weeks on site: demolition and rough-in in weeks 1–2, cabinetry and countertops in weeks 3–4, flooring, backsplash and appliances in weeks 5–6, and finishing and inspection in weeks 7–8. A same-layout refresh can be faster; a custom kitchen with structural changes takes longer. Cabinet lead times of 8–12 weeks run before site work begins, so ordering early is the single best way to protect your schedule.
Serving Toronto & the Greater Toronto Area
GMC Construction Inc. renovates kitchens throughout Toronto and the GTA. As a locally based general contractor, we know the region’s housing stock — from older homes with dated wiring and plumbing to modern condos with strict building requirements — and we plan every project accordingly.
Let’s Build Your Dream Kitchen
Whether you want a modern makeover, a hard-working family kitchen, or a full custom rebuild, we’re ready to help. Call us at 647-450-4466 or request your free, fixed-price quote — and we’ll walk your kitchen with you before a single number goes on paper.
Related Kitchen Guides
Planning your project? Explore our in-depth kitchen guides for costs, materials, and ideas across Toronto & the GTA:
